8mm Slimline System
8mm Horizontal System |
|
Components required are: |
|
| The fixing cup, used to fix the off set rod to the backing board or wall. | |
 |
|
 |
The connector is used to connect the offset rod and the main display rod. |
|
|
 |
The endcaps fit over the ends of the aluminium Rods |
|
|
 |
the off-set rod is 65mm long and one end is fitted into the fixing cup and the other end into the connector. |
|
|
and your choice of |
|
 |
the Polycarbonate Frame support |
|
|
or the |
|
 |
The Chrome Wire Frame Support |
 |
Using 8mm Matt Natural Anodised rods and our Polycarbonate Frame Support which clips onto the rod. |
|
|
 |
Using 8mm Matt Natural Anodised rods and the Chrome wire supports |
8mm Vertical System |
|
Components required are: |
|
 |
The fixing cup, used to fix the off set rod to the backing board or wall. |
|
|
|
The connector is used to connect the offset rod and the main display rod. |
|
|
|
The endcaps fit over the ends of the aluminium Rods |
|
|
|
The off-set rod is 135mm long and one end is fitted into the fixing cup and the other end into the connector. |
|
|
 |
The clear spacer is required on the vertical system so that you can use the Clearview, Mini or Front Loader Clip. The front loader is the recommended clip |
|
|
 |
These Clips fit onto the clear spacer which is fitted onto the rod. |
Photo of 8mm Vertical System |
|
 |
These Rods are 1200mm long and the offset rods are set approx 100mm – 150mm from the top and the bottom of the vertical rods. |
Sunglasses courtesy of Saltwater Sunglasses |
|
